With the head-up display driver can now see speed directly on the windshields, allows a driver to keep their head up (observing the road) and still see important vehicle information such as the car’s Speed (mph/km), Rpm, Water temp, Volt on to your windshields Water temp , volt warning function which can be set up by user ( water temp gauge & volt gauge) Auto dim when dark Project Speed (mph/km), Rpm, Water temp, Volt on to your windshields Speed warning function which can be set up by user
Plug and play. Activesafety HUD can auto adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System).
Comprehensive display. Activesafety HUD can display many parameters at the same time as follows, vehicle speed, engine speed, water tempe- rature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure.
Diversiform display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
Free switch. Km and mile can be switched freely to meet the need of inch auto meter.
Suitable size. The display area is 5.5 inches which is very clear for driver to read data.
Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle’s battery. Moreover, we pre- serve the hand switch function to control the HUD.
Flexible alarm mode. Activesafety HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer.
Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver.
Parameter value: show the value with the units of kilometers, miles and engine speed.
OBDII port: connect the car and HUD.
Fuel icon: flash when the fuel is not enough to drive 100km.
Engine failure: flash when vehicle’s engine has problems.